Pièce
Mixeur audio de type 1.pdf · 650 mots · du marché « Transformation du Musée de la Carte à Jouer - travaux de rénovation et agencement intérieur sur 18 lots (gros-œuvre,… », dossier de consultation officiel.
ECLER TECHNICAL DATA SHEET
SAMI-612
ANALOGUE PREAMPLIFIERS & MIXERS
Installation Mixers
PRODUCT OVERVIEW
SAMI-612 is an installation audio mixer in standard rack format, featuring 6 MIC/LINE Stereo inputs + 1 Stereo MIX
input and 1 Stereo MAIN output + 1 Stereo REC output. Each input has a dedicated 3-band tone control, a feature
which is fundamental to get a perfect microphone mix in an installation. Input 1 includes talkover (priority) function over
the mix bus and additional front panel jack connector. Main output ST/MONO mode switch and MUTE port for external
dry contact triggering.
KEY FEATURES APPLICATIONS
• 6 input channels, 2 main outputs 19” installation mixer • Retail
• Micro sensitivity level can be adjusted on the back panel • Hospitality
• +18V Phantom Power available in all “MIC” inputs • Education
• Direct micro input on front panel, channel 1 • Corporate
• Includes a talkover assigned to “INPUT 1” with internal • Sport & Wellness
release time adjustment
• Three-band tone controls for each channel, accessible with
a screwdriver
• Vu-meter for the mix signal
• Two internally adjustable output levels
• Recording output
• Direct access to the mixing bus allowing you to connect
another mixer and increase the number of inputs
• MUTE remote control input enabled by external dry contact
closure for connecting fire detection systems and other
safety devices.
• Mono/stereo switch
• Universal external power supply (multi-plug)
96-0048-0100 SAMI-612 EN 1
ECLER TECHNICAL DATA SHEET
TECHNICAL SPECIFICATIONS
SAMI-612
ANALOGUE AUDIO INPUT PORTS
Number of input ports 6, MIC/LINE ( 1 STEREO direct MIC input on front panel)
1, MIX LINE
Connection type MIC: 3-pin Euroblock
LINE/MIX: RCA
Input sensitivity LINE 2-5: 0dB
LINE 6: 0dB/-6dB (internally selectable)
MIC 1-5 BAL: -35dB
Input sensitivity adjust MIC/LINE: ±15dB
Input impedance LINE 1-6: 50kΩ
MIX LINE: 10kΩ
MIC 1-6 BAL: >1kΩ
CMRR MIC: >60dB @ 1 kHz
Phantom voltage +18VDC
ANALOGUE AUDIO OUTPUT PORTS
Number of output ports 1 main mix output
1 AUX/REC output
Connection type Main: 3-pin Euroblock
AUX/REC: RCA
Output type 1 STEREO/2 MONO main mix output
1 STEREO AUX/REC
Nominal output level OUT: 0dB/+6dB (internally selectable)
AUX/REC: 0dB/+6dB (follows MAIN OUT)
Output impedance OUT: 600Ω
AUX/REC: 10kΩ
SIGNAL
Frequency response LINE: 10Hz-50kHz -1dB
MIC BAL: 10Hz-30kHz -1dB
THD + Noise LINE: <0.005%
MIC BAL: <0.04%
Signal noise ratio LINE: >100dB
MIC BAL: >85dB
DEVICE CONTROL
Tone Control 3-way tone control (For all inputs)
Tone Frequency Cut BASS: 100Hz ±15dB
MID: 2kHz ±15dB
TREBLE: 10kHz ±15dB
Talkover TIME: 2 seconds
EFFECT: -30dB
Control Buttons Power ON, Talkover, LINE/MIC, L+R (output), Gain knob,
Volume knob
Status Indicators Power ON LED, MUTE LED, Vu-meter LEVEL LEDs
REMOTE CONTROL CONNECTIONS
GPIs MUTE control port NO/NC
2
ECLER TECHNICAL DATA SHEET
ELECTRICAL
Power supply ±17.5VDC External PSU
AC mains requirement 100-240 V @ 50-60Hz (External PSU: 17.5VDC)
AC mains connector IEC inlet connector
Power consumption 14.5VA / 6.8W
Cooling Passive
PHYSICAL
Operating temperature Min: -10°C ; 14°F
Max: 40°C ; 104°F
Operating humidity <85% HR
Storage temperature Min: -10°C ; 14°F
Max: 40°C ; 104°F
Storage humidity <90% HR
Installation options 19" rack format (1RU)
Included accessories ±17.5VDC multi-plug PSU, EuroBlocks,
Rubber Foot, Mini Jumpers
Dimensions (WxHxD) 482.5 x 44 x 153.7 mm / 19 x 1.73 x 6.05 in
Weight 1.9 kg / 4.19 lb
Shipping dimensions (WxHxD) 560 x 60 x 295 mm / 22.05 x 2.36 x 11.61 in
Shipping weight 2.7 kg / 5.95 lb
3
ECLER TECHNICAL DATA SHEET
MECHANICAL DIAGRAM
All product characteristics are subject to variation due to production tolerances.
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or
manufacturing that may affect these product specifications.
For technical queries contact your supplier, distributor or complete the contact form on our website,
in Support / Technical requests.
4
Motors, 166‐168 - 08038 Barcelona - Spain | Tel. (+34) 932238403 | information@ecler.com | www.ecler.com
Texte extrait tel quel de la pièce officielle, qui seule fait foi. La mise en page du document d'origine peut différer.