Prix1 % du montant attribué, plafonné à 5 000 € HT, dû uniquement si le marché vous est attribué.Le contrat

Pièce

Scaler vidéo de type 1.pdf · 1 561 mots · du marché « Transformation du Musée de la Carte à Jouer - travaux de rénovation et agencement intérieur sur 18 lots (gros-œuvre,… », dossier de consultation officiel.

Specifications
IN1604 Series



   Video input
    Number/signal type ������������������������ 1 analog RGBHV, component video (YUVi, YUVp, and YUV-HD), S-video, or
                                                     composite video
                                                     3 HDMI/DVI
    Connectors ������������������������������������ 1 female 15-pin HD
                                                     3 female HDMI type A
    Equalization ����������������������������������� Automatic
    Input cable length �������������������������� Up to 75' (22.9 m) for all supported input rates
    Nominal level���������������������������������� 1 Vp-p for Y of component video and S-video, and for composite video
                                                     0.7 Vp-p for RGB and for R-Y and B-Y of component video
                                                     0.3 Vp-p for C of S-video
    Minimum/maximum levels �������������� Analog: 0.0 V to 1.0 V with no offset at unity gain
    Impedance������������������������������������� 75 ohms
    Horizontal frequency ���������������������� 15 kHz to 100 kHz
    Vertical frequency ��������������������������� 24 Hz to 75 Hz
    Resolution range ���������������������������� 640x480 to 1920x1200* sampled pixel for pixel, NTSC, PAL, SECAM, 480i, 480p,
                                                     576i, 576p, 720p, 1080i, 1080p, and 2K
                                                     *reduced blanking
    Return loss ������������������������������������ >30 dB @ 5 MHz
    DC offset (max. allowable) �������������� 0.5 V
    Standards �������������������������������������� DVI 1.0, HDMI 1.3, HDCP 1.4

   Video processing
    Decoder ����������������������������������������� 12 bit digital (3D-adaptive comb filter)
    Analog sampling ���������������������������� 12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB)
    Digital pixel data bit depth �������������� 8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)
    Colors �������������������������������������������� 1 billion (10 bit processing)

   Video output
    Number/signal type
         IN1604 DTP ���������������������������� 1 DTP or HDBaseT, configurable
         IN1604 HD ������������������������������ 1 HDMI digital video
    Connectors
         IN1604 DTP ���������������������������� 1 female RJ-45
         IN1604 HD ������������������������������ 1 female HDMI
    HDMI peripheral device power ������� 200 mA
    Digital bit depth ������������������������������ 8 or 10 bit, automatic
    Scaled resolution ��������������������������� 640x4808, 800x6008, 1024x7688, 1280x7208,1280x7688, 1280x8008,
                                                     1280x10248, 1360x7688, 1366x7688, 1400x10508, 1440x9008, 1600x9008,
                                                     1600x12008, 1680x10508, 1920x12008
                                                     HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8,
                                                     2K (2048x1080)1,2,3,4,5,6,7,8
                                                     1
                                                       = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = at 30 Hz,
                                                     6
                                                       = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz
    Standards �������������������������������������� HDMI 1.3, HDCP 1.4




                                            Extron IN1604 Series Scaling Presentation Switchers • Specifications                  1
Specifications • IN1604 Series (Continued)


     Sync
      Input type �������������������������������������� RGBHV, RGBS, RGsB, bi-level or tri-level component video
      Input standards ������������������������������ NTSC 3.58, NTSC 4.43, PAL, SECAM, TMDS
      Input level �������������������������������������� 2.75 V to 5.0 Vp-p for RGBHV or RGBS
                                                         0.6 Vp-p for component video tri-level sync
                                                         0.3 Vp-p for component video bi-level sync, RGsB, or composite video
      Input impedance ���������������������������� Horizontal and vertical: 510 ohms
      Max. input voltage�������������������������� 5.0 Vp-p

     Interconnection between IN1604 DTP and DTP/HDBaseT receiver (IN1604 DTP only)
      Connectors ������������������������������������ 1 female RJ-45
      Termination standard���������������������� TIA/EIA-T568B
      Signal transmission distance
          DTP 330 ���������������������������������� Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable
          DTP 230 ���������������������������������� Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 STP cable
      Cable requirements ������������������������ Solid conductor, 24 AWG or better
      Cable recommendations ���������������� 400 MHz bandwidth, STP (shielded twisted pair)

       NOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.


       NOTE: Output signals:
             DTP: HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
             HDBaseT: HDMI with embedded audio, RS-232 and IR

     Audio
      Gain �����������������������������������������������                Input             Output          System Gain
                                                                          Analog input 1    Analog output      0 dB
                                                                          (TRS)             TP output          -6 dB
                                                             Unbalanced
                                                                          Analog input 2    Analog output      -6 dB
                                                                          (captive screw)   TP output          -12 dB
                                                                          Analog input 2    Analog output      0 dB
                                                             Balanced     (captive screw)   TP output          -6 dB

      Frequency response ���������������������� 20 Hz to 20 kHz, ±0.5 dB
      THD + Noise ���������������������������������� < 0.1% @ 1 kHz, 20 Hz to 20 kHz bandwidth (at nominal level)
      S/N ������������������������������������������������ >90 dB, at maximum output (unweighted)
      Crosstalk ��������������������������������������� ≤ -80 dB @ 1 kHz, fully loaded
      Stereo channel separation�������������� >80 dB @ 1 kHz

     Audio input
      Number/signal type ������������������������ 1 analog stereo, unbalanced
                                                       1 analog stereo, balanced/unbalanced
                                                       3 digital stereo, de-embedded from HDMI (PCM only)
      Connectors ������������������������������������ (1) 3.5 mm stereo jack; tip (L), ring (R), sleeve (ground)
                                                       (1) 3.5 mm captive screw connector, 5 pole
                                                       3 female HDMI type A
      Impedance������������������������������������� Analog inputs: >10k ohms unbalanced, >20k ohms balanced
      Nominal level���������������������������������� 3.5 mm stereo jack: +4 dBu (1.23 Vrms)
                                                       Captive screw connector: +4 dBu (1.23 Vrms) or -10 dBV (316 mVrms),
                                                       adjustable
      Maximum level ������������������������������� Analog inputs: +15 dBu unbalanced, +21 dBu balanced
      CMRR�������������������������������������������� 70 dB @ 1 kHz
      Input gain adjustment �������������������� -18 dB to +24 dB, adjustable per input, in 1 dB steps, analog inputs only

       NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu




                                                             Extron IN1604 Series Scaling Presentation Switchers • Specifications   2
Specifications • IN1604 Series (Continued)


     Audio output
      Number/signal type
         IN1604 DTP ���������������������������� 1 analog stereo or mono, balanced/unbalanced
                                                 1 DTP (embedded digital audio and remote balanced/unbalanced analog audio)
                                                 or HDBaseT (embedded digital)

          NOTE: Remote analog audio output is not available in HDBaseT mode.

          IN1604 HD ������������������������������ 1 analog stereo or mono, balanced/unbalanced
                                                   1 HDMI embedded
      Connectors
          IN1604 DTP ���������������������������� (1) 3.5 mm captive screw connector, 5 pole
                                                        1 female RJ-45
          IN1604 HD ������������������������������ (1) 3.5 mm captive screw connector, 5 pole
                                                        1 female HDMI
      Impedance������������������������������������� 50 ohms unbalanced, 100 ohms balanced
      Gain error��������������������������������������� ±0.5 dB channel to channel
      Maximum level (Hi-Z) ���������������������� >+15 dBu, unbalanced, >+21 dBu, balanced at 1% THD+N
      Output volume range ��������������������� 0 to -100 dB in 1 dB steps
       NOTE: System gain for the analog DTP receiver output is rated at -12 dB (unbalanced) and -6 dB (balanced).

     Communications — scaling presentation switcher
      Serial control port
           IN1604 DTP ���������������������������� 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (rear panel, uses
                                                        3 poles)
           IN1604 HD ������������������������������ 1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (rear panel)
      Baud rate and protocol ������������������ 9600, 8 data bits, 1 stop bit, no parity
      Serial control pin configuration
           IN1604 DTP ���������������������������� 1, 2 = unused, 3 = Tx, 4 = Rx, 5 = Gnd
           IN1604 HD ������������������������������ 1 = Tx, 2 = Rx, 3 = Gnd
      Contact closure ����������������������������� 4 contact closure inputs on (1) 3.5 mm captive screw connector, 5 pole
      Tally output ������������������������������������ 4 tally outputs on (1) 3.5 mm captive screw connector, 5 pole
      Tally output power �������������������������� +5 VDC, 0.2 A
      USB control port ���������������������������� 1 front panel female mini USB B
      USB standards ������������������������������ USB 2.0, high speed
      Program control ����������������������������� Extron PCS configuration software for Windows®
                                                        Extron Simple Instruction Set (SIS™)
     Communications — external device (pass-through, unidirectional or bidirectional)
     (RS-232/IR over TP for the IN1604 DTP only)
       NOTE: Protocol is mirrored between the connected DTP endpoint and the "Over TP" port on the IN1604 DTP.
             Signals from a control device pass into the "Over TP" port, are embedded with the TP signal, and sent to
             an individual DTP Rx or HDBaseT endpoint for control of remote sink devices.
                 The "Over TP" port is simply a pass-through connection to endpoints. There is no RS-232 or IR insertion
                 from any IN1604 DTP control port to the "Over TP" port.

      Serial control pass-through port
          "Over TP" output ��������������������� RS-232 via (1) 3.5 mm captive screw connector, 5 pole (shared with IR port)
      Baud rates ������������������������������������� Up to 115200 baud
      Protocol ����������������������������������������� 6 - 8 data bits
                                                         1 or 2 stop bits
                                                         no parity (default)
                                                         even or odd parity
                                                         flow control = XON, XOFF, none


                                             Extron IN1604 Series Scaling Presentation Switchers • Specifications                 3
Specifications • IN1604 Series (Continued)


         Serial control pin configuration ������� 1 = Tx, 2 = Rx, 3 = Gnd
         IR pass-through control port ���������� TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
             "Over TP" output ��������������������� (1) 3.5 mm captive screw connector, 5 pole (shared with RS-232 port)
         IR control pin configuration ������������ 3 = Gnd, 4 = IR Tx, 5 = IR Rx

      General
         Power supply ��������������������������������� Internal
                                                        Input: 100-240 VAC, 50-60 Hz
         Power consumption
            Full power
                 IN1604 DTP ����������������������� 25.0 watts
                 IN1604 HD ������������������������ 15.1 watts
            Power save mode
                 IN1604 DTP ����������������������� 9.0 watts
                 IN1604 HD ������������������������ 6.6 watts
         Remote power capability���������������� IN1604 DTP only: supports one DTP Rx endpoint device

          NOTE: Remote power is not available in HDBaseT mode.

         Temperature/humidity �������������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
                                                            Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
         Cooling ������������������������������������������ Fan, air flows front to rear, vents on front and rear
         Thermal dissipation
             Full power
                  IN1604 DTP ����������������������� 67.0 BTU/hr
                  IN1604 HD ������������������������ 50.2 BTU/hr
             Power save mode
                  IN1604 DTP ����������������������� 28.0 BTU/hr
                  IN1604 HD ������������������������ 22.3 BTU/hr
         Mounting
             Rack mount����������������������������� Yes, with optional rack shelf
             Furniture mount ����������������������� Yes, with optional under-desk or through-desk mounting kit
         Enclosure type ������������������������������� Metal
         Enclosure dimensions �������������������� 1.75 H x 8.75" W x 8.5" D (1U high, half rack wide)
                                                            (4.4 cm H x 22.2 cm W x 21.6 cm D)
                                                            (Depth excludes connectors.)
         Product weight
             IN1604 DTP ���������������������������� 2.1 lbs (1.0 kg)
             IN1604 HD ������������������������������ 2.1 lbs (1.0 kg)
         Regulatory compliance������������������� CE, c-UL, UL, C-tick, FCC Class A, ICES, VCCI, RoHS, WEEE
         Warranty ���������������������������������������� 3 years parts and labor
         Everlast power supply warranty������ 7 years parts and labor

          NOTE: All nominal levels are at ±10%.


          NOTE: Specifications are subject to change without notice.

                                                                                                                                             5322-D6




   ©2020-2021 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com        4


Texte extrait tel quel de la pièce officielle, qui seule fait foi. La mise en page du document d'origine peut différer.