Pièce
Scaler vidéo de type 1.pdf · 1 561 mots · du marché « Transformation complète du Musée de la Carte à Jouer - Travaux multi-corps de métier (18 lots) : démolitions,… », dossier de consultation officiel.
Specifications
IN1604 Series
Video input
Number/signal type ������������������������ 1 analog RGBHV, component video (YUVi, YUVp, and YUV-HD), S-video, or
composite video
3 HDMI/DVI
Connectors ������������������������������������ 1 female 15-pin HD
3 female HDMI type A
Equalization ����������������������������������� Automatic
Input cable length �������������������������� Up to 75' (22.9 m) for all supported input rates
Nominal level���������������������������������� 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels �������������� Analog: 0.0 V to 1.0 V with no offset at unity gain
Impedance������������������������������������� 75 ohms
Horizontal frequency ���������������������� 15 kHz to 100 kHz
Vertical frequency ��������������������������� 24 Hz to 75 Hz
Resolution range ���������������������������� 640x480 to 1920x1200* sampled pixel for pixel, NTSC, PAL, SECAM, 480i, 480p,
576i, 576p, 720p, 1080i, 1080p, and 2K
*reduced blanking
Return loss ������������������������������������ >30 dB @ 5 MHz
DC offset (max. allowable) �������������� 0.5 V
Standards �������������������������������������� DVI 1.0, HDMI 1.3, HDCP 1.4
Video processing
Decoder ����������������������������������������� 12 bit digital (3D-adaptive comb filter)
Analog sampling ���������������������������� 12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB)
Digital pixel data bit depth �������������� 8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)
Colors �������������������������������������������� 1 billion (10 bit processing)
Video output
Number/signal type
IN1604 DTP ���������������������������� 1 DTP or HDBaseT, configurable
IN1604 HD ������������������������������ 1 HDMI digital video
Connectors
IN1604 DTP ���������������������������� 1 female RJ-45
IN1604 HD ������������������������������ 1 female HDMI
HDMI peripheral device power ������� 200 mA
Digital bit depth ������������������������������ 8 or 10 bit, automatic
Scaled resolution ��������������������������� 640x4808, 800x6008, 1024x7688, 1280x7208,1280x7688, 1280x8008,
1280x10248, 1360x7688, 1366x7688, 1400x10508, 1440x9008, 1600x9008,
1600x12008, 1680x10508, 1920x12008
HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8,
2K (2048x1080)1,2,3,4,5,6,7,8
1
= at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = at 30 Hz,
6
= at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz
Standards �������������������������������������� HDMI 1.3, HDCP 1.4
Extron IN1604 Series Scaling Presentation Switchers • Specifications 1
Specifications • IN1604 Series (Continued)
Sync
Input type �������������������������������������� RGBHV, RGBS, RGsB, bi-level or tri-level component video
Input standards ������������������������������ NTSC 3.58, NTSC 4.43, PAL, SECAM, TMDS
Input level �������������������������������������� 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync, RGsB, or composite video
Input impedance ���������������������������� Horizontal and vertical: 510 ohms
Max. input voltage�������������������������� 5.0 Vp-p
Interconnection between IN1604 DTP and DTP/HDBaseT receiver (IN1604 DTP only)
Connectors ������������������������������������ 1 female RJ-45
Termination standard���������������������� TIA/EIA-T568B
Signal transmission distance
DTP 330 ���������������������������������� Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable
DTP 230 ���������������������������������� Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 STP cable
Cable requirements ������������������������ Solid conductor, 24 AWG or better
Cable recommendations ���������������� 400 MHz bandwidth, STP (shielded twisted pair)
NOTE: Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
NOTE: Output signals:
DTP: HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT: HDMI with embedded audio, RS-232 and IR
Audio
Gain ����������������������������������������������� Input Output System Gain
Analog input 1 Analog output 0 dB
(TRS) TP output -6 dB
Unbalanced
Analog input 2 Analog output -6 dB
(captive screw) TP output -12 dB
Analog input 2 Analog output 0 dB
Balanced (captive screw) TP output -6 dB
Frequency response ���������������������� 20 Hz to 20 kHz, ±0.5 dB
THD + Noise ���������������������������������� < 0.1% @ 1 kHz, 20 Hz to 20 kHz bandwidth (at nominal level)
S/N ������������������������������������������������ >90 dB, at maximum output (unweighted)
Crosstalk ��������������������������������������� ≤ -80 dB @ 1 kHz, fully loaded
Stereo channel separation�������������� >80 dB @ 1 kHz
Audio input
Number/signal type ������������������������ 1 analog stereo, unbalanced
1 analog stereo, balanced/unbalanced
3 digital stereo, de-embedded from HDMI (PCM only)
Connectors ������������������������������������ (1) 3.5 mm stereo jack; tip (L), ring (R), sleeve (ground)
(1) 3.5 mm captive screw connector, 5 pole
3 female HDMI type A
Impedance������������������������������������� Analog inputs: >10k ohms unbalanced, >20k ohms balanced
Nominal level���������������������������������� 3.5 mm stereo jack: +4 dBu (1.23 Vrms)
Captive screw connector: +4 dBu (1.23 Vrms) or -10 dBV (316 mVrms),
adjustable
Maximum level ������������������������������� Analog inputs: +15 dBu unbalanced, +21 dBu balanced
CMRR�������������������������������������������� 70 dB @ 1 kHz
Input gain adjustment �������������������� -18 dB to +24 dB, adjustable per input, in 1 dB steps, analog inputs only
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Extron IN1604 Series Scaling Presentation Switchers • Specifications 2
Specifications • IN1604 Series (Continued)
Audio output
Number/signal type
IN1604 DTP ���������������������������� 1 analog stereo or mono, balanced/unbalanced
1 DTP (embedded digital audio and remote balanced/unbalanced analog audio)
or HDBaseT (embedded digital)
NOTE: Remote analog audio output is not available in HDBaseT mode.
IN1604 HD ������������������������������ 1 analog stereo or mono, balanced/unbalanced
1 HDMI embedded
Connectors
IN1604 DTP ���������������������������� (1) 3.5 mm captive screw connector, 5 pole
1 female RJ-45
IN1604 HD ������������������������������ (1) 3.5 mm captive screw connector, 5 pole
1 female HDMI
Impedance������������������������������������� 50 ohms unbalanced, 100 ohms balanced
Gain error��������������������������������������� ±0.5 dB channel to channel
Maximum level (Hi-Z) ���������������������� >+15 dBu, unbalanced, >+21 dBu, balanced at 1% THD+N
Output volume range ��������������������� 0 to -100 dB in 1 dB steps
NOTE: System gain for the analog DTP receiver output is rated at -12 dB (unbalanced) and -6 dB (balanced).
Communications — scaling presentation switcher
Serial control port
IN1604 DTP ���������������������������� 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (rear panel, uses
3 poles)
IN1604 HD ������������������������������ 1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (rear panel)
Baud rate and protocol ������������������ 9600, 8 data bits, 1 stop bit, no parity
Serial control pin configuration
IN1604 DTP ���������������������������� 1, 2 = unused, 3 = Tx, 4 = Rx, 5 = Gnd
IN1604 HD ������������������������������ 1 = Tx, 2 = Rx, 3 = Gnd
Contact closure ����������������������������� 4 contact closure inputs on (1) 3.5 mm captive screw connector, 5 pole
Tally output ������������������������������������ 4 tally outputs on (1) 3.5 mm captive screw connector, 5 pole
Tally output power �������������������������� +5 VDC, 0.2 A
USB control port ���������������������������� 1 front panel female mini USB B
USB standards ������������������������������ USB 2.0, high speed
Program control ����������������������������� Extron PCS configuration software for Windows®
Extron Simple Instruction Set (SIS™)
Communications — external device (pass-through, unidirectional or bidirectional)
(RS-232/IR over TP for the IN1604 DTP only)
NOTE: Protocol is mirrored between the connected DTP endpoint and the "Over TP" port on the IN1604 DTP.
Signals from a control device pass into the "Over TP" port, are embedded with the TP signal, and sent to
an individual DTP Rx or HDBaseT endpoint for control of remote sink devices.
The "Over TP" port is simply a pass-through connection to endpoints. There is no RS-232 or IR insertion
from any IN1604 DTP control port to the "Over TP" port.
Serial control pass-through port
"Over TP" output ��������������������� RS-232 via (1) 3.5 mm captive screw connector, 5 pole (shared with IR port)
Baud rates ������������������������������������� Up to 115200 baud
Protocol ����������������������������������������� 6 - 8 data bits
1 or 2 stop bits
no parity (default)
even or odd parity
flow control = XON, XOFF, none
Extron IN1604 Series Scaling Presentation Switchers • Specifications 3
Specifications • IN1604 Series (Continued)
Serial control pin configuration ������� 1 = Tx, 2 = Rx, 3 = Gnd
IR pass-through control port ���������� TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
"Over TP" output ��������������������� (1) 3.5 mm captive screw connector, 5 pole (shared with RS-232 port)
IR control pin configuration ������������ 3 = Gnd, 4 = IR Tx, 5 = IR Rx
General
Power supply ��������������������������������� Internal
Input: 100-240 VAC, 50-60 Hz
Power consumption
Full power
IN1604 DTP ����������������������� 25.0 watts
IN1604 HD ������������������������ 15.1 watts
Power save mode
IN1604 DTP ����������������������� 9.0 watts
IN1604 HD ������������������������ 6.6 watts
Remote power capability���������������� IN1604 DTP only: supports one DTP Rx endpoint device
NOTE: Remote power is not available in HDBaseT mode.
Temperature/humidity �������������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling ������������������������������������������ Fan, air flows front to rear, vents on front and rear
Thermal dissipation
Full power
IN1604 DTP ����������������������� 67.0 BTU/hr
IN1604 HD ������������������������ 50.2 BTU/hr
Power save mode
IN1604 DTP ����������������������� 28.0 BTU/hr
IN1604 HD ������������������������ 22.3 BTU/hr
Mounting
Rack mount����������������������������� Yes, with optional rack shelf
Furniture mount ����������������������� Yes, with optional under-desk or through-desk mounting kit
Enclosure type ������������������������������� Metal
Enclosure dimensions �������������������� 1.75 H x 8.75" W x 8.5" D (1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 21.6 cm D)
(Depth excludes connectors.)
Product weight
IN1604 DTP ���������������������������� 2.1 lbs (1.0 kg)
IN1604 HD ������������������������������ 2.1 lbs (1.0 kg)
Regulatory compliance������������������� CE, c-UL, UL, C-tick, FCC Class A, ICES, VCCI, RoHS, WEEE
Warranty ���������������������������������������� 3 years parts and labor
Everlast power supply warranty������ 7 years parts and labor
NOTE: All nominal levels are at ±10%.
NOTE: Specifications are subject to change without notice.
5322-D6
©2020-2021 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com 4
Texte extrait tel quel de la pièce officielle, qui seule fait foi. La mise en page du document d'origine peut différer.